| Description | IQ-S Chipset
Dimensions - 88mm by 47.5mm by 31.7mm
Dual High-Amp 18650 Batteries - Not Included
Wattage Output Range: 1-230W
Voltage Output Range: 1.2-8.2V
Resistance Range - VW Mode: 0.1-2.5ohm
Resistance Range - TC Mode: 0.05-2.0ohm
Temperature Range: 200°F-600°F /100°C-315°C
Nickel, Titanium, and Stainless Steel Wire Compatibility
Firing Speed: 0.001s
Zinc-Alloy Chassis Construction
Intuitive Firing Button
0.96" OLED Display Screen
Two Adjustment Buttons
8s Cut-Off Protection
Atomizer Detection
Over-Heating Protection
Short Circuit Protection
Low Battery Warning
Reverse Polarity
Over-Discharge Protection
Type-C Port
Available in Black, Blue, Red, Brown, Prism Rainbow, White Blue, White Red, and Black Carbon Fiber |
- Dimensions - 104.9mm by 33.7mm by 24.4mm
- Integrated 2000mAh Rechargeable Battery
- Wattage Output Range: 5-80W
- Voltage Output Range: 0.5-8.4V
- Resistance Range: 0.15-2.5ohm
- Zinc-Alloy Chassis Construction
- Intuitive Firing Button
- OLED Display Screen
- Two Adjustment Buttons
- Dual Airflow Adjustment Dials
- 4.5mL Refillable Pod - RPM 2 & RPM Pod
- Proprietary Coil Use
- 0.16ohm RPM 2 Mesh Coil
- 0.4ohm RPM Mesh Coil
- Press-Fit Coil Installation
- Magnetic Pod Connection
- Type-C Port
|
- SMOK THINNER Kit Dimensions – 88mm by 43mm by 10mm
- Integrated 750mAh Rechargeable Battery
- Wattage Output Range: 1-25W
- Voltage Output Range: 0.7-4.0V
- Resistance Range: 0.6-3.0ohm
- Zinc-Alloy Chassis Construction of SMOK THINNER Kit
- Draw-Activated Firing Button
- 0.69″ OLED Display Screen
- Wattage Adjustment Button
- 4mL E-Liquid Capacity
- Bottom Fill System – Silicone Stoppered
- Integrated 0.8ohm Mesh Coil Pod
- Magnetic Pod Connection
|
- Dimensions - 112mm by 23mm by 13mm
- Integrated 1000mAh Rechargeable Battery
- Wattage Output Range: 11-16W
- Aluminum Alloy Chassis Construction
- Intuitive Firing Button
- Draw-Activated Firing Mechanism
- Dual Firing Modes - Draw or Button Activated
- 4 LED Breathing Lights
- Adjustable Airflow Control Switch
- 2mL Pod Capacity
- Top Fill System - Mouthpiece Cover
- 0.8ohm MESH Pod
- 1.2ohm Regular Pod
- Magnetic Pod Connection
- Type-C USB Port
- Available in Black, Space Grey, Silver, Grape Purple, Orange Red, Lime Green
|
- Dimensions - 88.3mm by 24.5mm by 14.5mm
- Integrated 800mAh Rechargeable Battery
- Wattage Output Range: 6-25W
- Voltage Output Range: 3.0-4.0V
- Zinc-Alloy Chassis Construction
- LED Battery Life Indicator Light
- Ergonomic Mouthpiece
- 2mL Pod Capacity
- Side Fill System - Silicone Stoppered
- SMOK NOVO 3 Pod Series
- 0.8ohm NOVO 3 Pods
- Updated Airflow Pathing
- Push Fit Pod Connection
- 8s Overtime Protection
- Short Circuit Protection
- Low Voltage Protection
- Bottom MicroUSB Port
|
- Internal 1400 mAh rechargeable battery
- 91.05mm by 43.1mm by 28.6mm dimensions
- 5–45 watts range
- IP67 Dust/Shock/Water Resistance Rating
- Zinc alloy and plastic construction
- Single firing button
- Dual button adjustments
- 0.96 inch TFT screen display
- Refillable pod system
- 4.0 mL vape juice capacity
- Silicone stoppered fill port
- Magnetic pod connection
- The top adjustable airflow control ring
- Press-fit coil installation
- 0.4 ohm B Series Coil: rated 25–35W
- 0.6 ohm B Series Coil: rated 15–25W
- USB Type-C charge port
- 510 drip tip
|
| Content | Check out the SMOK MORPH 2 230W Starter Kit, featuring the IQ-S Chipset, extensive temperature control suite, and is paired with the TFV18 Tank.
Constructed from durable zinc-alloy, the SMOK MORPH 2 Starter Kit offers an impervious chassis to protect the dual high-amp 18650 battery, not included.
Powered by the IQ-S Chipset, the SMOK MORPH 2 Kit can access an extensive temperature control suite, offering compatibility with nickel, titanium, and stainless steel heating elements.
Packed with a slew of protections that make vaping safe against the failure of the device, the MORPH 2 Kit calls upon the TFV18 Tank to deliver satisfying flavor.
Holding up to 7.5mL of eLiquid, the TFV18 Tank utilizes a 0.33ohm Meshed Coil or 0.15ohm Dual Meshed Coil for the creation of gargantuan clouds of vapor, carefully adjusted via dual slotted bottom airflow intakes. | Check out the SMOK Nord 4 80W Pod Kit, featuring a 2000mAh battery, 5-80W output range, and two proprietary pods for the RPM & RPM 2 Coil Series.
Constructed from durable zinc alloy, the chassis of the Nord 4 pod kit features dual airflow adjustment dials to grant the user precise control over the airflow entering the coil.
Offering a 5-80W output range, the SMOK Nord 4 pod kit can deliver satisfying vapor from the RPM or RPM 2 Coil Series when used in the respective pod.
Holding up to 4.5mL of e-juice or nicotine salt, the SMOK Nord 4 delivers delectable flavors and vapor at the press of the intuitive firing button and features two adjustment buttons at the bottom of the side-mounted screen | Check out the SMOK THINER 25W Pod System Kit, 4mL e-liquid capacity, integrated 750mAh battery, and draw-activated firing system.
The SMOK THINER features a wattage output that can be adjusted and is shown on an OLED Display Screen.
It produces between 1 and 25W. The SMOK THINER uses a draw-activated firing mechanism that can be adjusted with a single button, thus there are no other buttons required, and built like a card.
The SMOK Thiner Pod System Kit is ideal for people who are constantly moving around because it can be conveniently stored in a pocket, handbag.
The SMOK 25W Pod System Kit is a compact, card-style kit that is perfect for vaping when on the go. It includes a 750mAh internal battery that can power vaping for up to a whole day on a single charge. You can select the ideal power level to match your favourite vaping style.
A Thiner 2ml refillable pod with a built-in 0.8 Ohm coil is included with each kit. This kit produces a little amount of vapour and is designed for MTL (Mouth To Lung) vaping. | Discover the Vaporesso XROS 2 16W Pod System, featuring a 1000mAh battery, dual firing systems, and compatibility with both the Mesh and Regular XROS Pods.
Adopting an aluminium alloy chassis, the body is slim and lightweight, making the XROS 2 Pod System perfect for those travelling or on-the-go.
Delivering superior vaping from the 11W or 16W output, depending on the type of pod used, the XROS 2 can last throughout the entire day and can work off a draw-to-fire or button activated firing system. | The SMOK NOVO 3 Pod system is an ultra-compact vape featuring a stylish design and a built-in 800mAh battery that delivers 25W power output using automatic draw-activated firing.
The refillable 2ml pod contains a powerful atomizer that uses speciality cotton to provide you with unparalleled flavor and the voluminous clouds you crave.
Its auto-draw feature makes this nicotine salt vaporizer convenient and easy to use.
The Novo 3 Pod System relays the remaining charge via LED indicator lights and can be recharged from the bottom via USB Port featuring pass-through capabilities to allow use during charging and provides a satisfying all-day vaping experience The NOVO 3 is an affordable, discrete, and pocketable pod mod available in a variety of vibrant colors Great for use with Salt Based Nicotine! | The Geekvape H45 Kit or also known as the Aegis Hero 2 is an all-in-one pod system which features an internal 1400 mAh rechargeable battery and has a 45-watt maximum output.
The device utilizes a refillable pod that has a 4.0 mL e-juice capacity and is filled via the silicone stoppered fill port.
The vape device is compatible with the Geekvape B Series Coils which features a press-fit installation mechanism and includes a 0.4 and 0.6 ohm coil.
Vapers can also adjust airflow via the top airflow control ring to dial in that perfect vaping experience |
Reviews
There are no reviews yet.