| Description | IQ-S Chipset
Dimensions - 88mm by 47.5mm by 31.7mm
Dual High-Amp 18650 Batteries - Not Included
Wattage Output Range: 1-230W
Voltage Output Range: 1.2-8.2V
Resistance Range - VW Mode: 0.1-2.5ohm
Resistance Range - TC Mode: 0.05-2.0ohm
Temperature Range: 200°F-600°F /100°C-315°C
Nickel, Titanium, and Stainless Steel Wire Compatibility
Firing Speed: 0.001s
Zinc-Alloy Chassis Construction
Intuitive Firing Button
0.96" OLED Display Screen
Two Adjustment Buttons
8s Cut-Off Protection
Atomizer Detection
Over-Heating Protection
Short Circuit Protection
Low Battery Warning
Reverse Polarity
Over-Discharge Protection
Type-C Port
Available in Black, Blue, Red, Brown, Prism Rainbow, White Blue, White Red, and Black Carbon Fiber |
- Dimensions - 110mm by 21.2mm by 11.6mm
- Removable 520mAh Rechargeable Battery
- Wattage Output Range: 11W
- Voltage Output Range: 3.2-4.0V
- Direct Voltage Based Output
- Resistance Range: 1.2-1.5ohm
- Dual Firing Mechanism - Draw Activated or Button Activated
- Aluminium-Alloy Chassis Construction
- LED Battery Life Indicator Light
- Side Mounted Airflow Holes on Each Side
- 2mL Capacity Juice Pods
- 1.4ohm Pod Coil Resistance
- Pro-FOCS Flavor Technology
- Top Fill System - Drip Tip Doubles as Fill Port Cover
- 3.5mm Fill Port - Dual Ports
- Minimum Fill Line on Pod
- Proprietary Gold-Plated Magnetic Snap-In Connection
- Draw-Activated Mechanism Fault Diagnosis
- Short-Circuit Protection
- Low Power Alert
- 10 Second Cut Off Protection
|
- Proprietary Chipset
- Dimensions - 110.5mm by 21.5mm by 13mm
- Integrated 700mAh Rechargeable Battery
- Wattage Output Range: 1-25W
- Voltage Output Range: 0.5-4.0V
- Resistance Range: 0.6-3.0ohm
- Zinc-Alloy Chassis Construction
- Draw-Activated Firing Mechanism
- 69" OLED Display Screen
- Power Button
- 3mL Refillable Pod
- Side Fill System - Silicone Stoppered
- 8ohm DC MTL Pod
- Magnetic Pod Connection
- Intelligent Atomizer Recognition
- 8s Cut-Off Protection
- Short-Circuit Protection
- Low Battery Warning
- Type-C USB Port
|
- Dimensions - 100mm x 31mm x 23mm
- Integrated 1500mAh Rechargeable Battery
- Wattage Output Range: 5-60W
- Voltage Output Range: 0.5-4.0V
- Resistance Range: 0.2-3.0ohm
- Zinc-Alloy Chassis Construction
- IP67 Rating - Water/Dust/Shock Proofing
- Intuitive Firing Button
- LED Indicator Light
- Side OLED Display Screen
- Two Adjustment Buttons
- Magnetic Pod Connection
- 6mL Nord X RPM & RPM 2 Pod Capacity
- Side Fill System - Silicone Stoppered
- SMOK RPM & RPM 2 Coil Series
- 0.16ohm RPM 2 Mesh Coil - rated for 25-50W
- 0.4ohm RPM Mesh Coil - rated for 25W
- Press-Fit Connection
- Atomizer Recognition
- Overheating Protection
- 8S Cut-Off Protection
- Short-Circuit Protection
- Low Battery Warning
- MicroUSB Port
|
- Dimensions: 107.4mm by 27.5mm by 15.6mm
- Battery: Integrated 850mAh
- Wattage Range: 5-20W
- Aluminum-Alloy Chassis Construction
- Intuitive Firing Button
- Juice Viewing Window
- OLED Display Screen
- Pod Capacity: 3mL
- Fill System: Top Fill
- Uwell Caliburn G/G2 Coil Series
- 0.8ohm Caliburn G Coils
- 1.2ohm Caliburn G2 Coils
- Press Fit Coil Installation
- Magnetic Pod Connection
- Intelligent Resistance Detection
- Low Power Protection
- 8s Vaping Overtime Protection
- Charging: Type-C Port
|
- Dimensions: 88.3mm (h) x 24.3mm (w) x 14.3mm (d)
- Weight: 40g
- Battery Capacity: 450mAh
- Input Voltage: 3.3V - 4.2V
- Output Wattage: 10W - 16W
- Refillable Open Pod System
- E-Juice Capacity: 2mL
- Micro USB Port
|
| Content | Check out the SMOK MORPH 2 230W Starter Kit, featuring the IQ-S Chipset, extensive temperature control suite, and is paired with the TFV18 Tank.
Constructed from durable zinc-alloy, the SMOK MORPH 2 Starter Kit offers an impervious chassis to protect the dual high-amp 18650 battery, not included.
Powered by the IQ-S Chipset, the SMOK MORPH 2 Kit can access an extensive temperature control suite, offering compatibility with nickel, titanium, and stainless steel heating elements.
Packed with a slew of protections that make vaping safe against the failure of the device, the MORPH 2 Kit calls upon the TFV18 Tank to deliver satisfying flavor.
Holding up to 7.5mL of eLiquid, the TFV18 Tank utilizes a 0.33ohm Meshed Coil or 0.15ohm Dual Meshed Coil for the creation of gargantuan clouds of vapor, carefully adjusted via dual slotted bottom airflow intakes. | The Uwell CALIBURN 11W Pod System is a finely-crafted vape kit, combining a dual firing mechanism, aluminium alloy chassis, and 520mAh battery, and utilizes Uwell's proprietary Pro-FOCS flavor technology to maximize the effectiveness flavors.
Constructed from sturdy but lightweight aluminium alloy, within the CALIBURN is a removable 520mAh rechargeable battery designed to allow for charging outside of the device to ensure no downtime for the CALIBURN when needed.
In addition, the CALIBURN features a dual-method firing mechanism, using either the draw-activated firing mechanism or the intuitive firing button.
Should the draw-activated firing mechanism fail, the intuitive button should still continue to function when needed.
Furthermore, the CALIBURN Pod System possesses and uses the Pro-FOCS flavor technology, recycling drawn airflow through the atomizer core to load the airflow with condensed flavor.
A top fill 2mL pod is used to contain today's favourite eJuice, firing at resistances of 1.4ohm, to provide the complete vape experience. | Shop the SMOK NFIX 25W Pod System, featuring a 700mAh battery, 1-25W range, and operates off a draw-activated firing mechanism to fire the 0.8ohm MTL Pod.
Constructed from durable zinc-alloy, the SMOK NFIX Pod System is lightweight and resistant to light falls and drops.
Integrated into the chassis is a proprietary chipset powered by the 700mAh rechargeable battery, rapidly rechargeable via the bottom MicroUSB Type-C port. Firing between the range of 1-25W, the SMOK NFIX possesses adjustable wattage and a nifty power button to conserve battery.
Displaying the wattage and relevant vaping data on a 0.69" OLED Screen, the NFIX is minimalist with features to keep it modern.
At the top, a magnetic pod can hold up to 3mL of eJuice or nicotine salts within its side-filled capacity and will deliver tasty clouds of vapor in MTL fashion thanks to its 0.8ohm integrated dual coil. | Utilizing 6mL refillable pods, the SMOK NORD X accepts coils in a bottom press fit connection, allowing quick and easy coil changes.
Constructed from durable zinc-alloy, the chassis of the NORD X is rated IP67, preventing the intrusion of dust or water, and is shock-proof, granting protection against light falls and drops. Displaying information on the side mounted OLED Display Screen, the NORD X relays critical vaping data back to the user in a legible easy to read manner. | Constructed from durable aluminium alloy, the chassis of the Caliburn X Pod System offers a strong and resilient chassis against light falls and drops.
Equipped with an 850mAh battery, the integrated battery delivers plenty of vapor throughout the day, allowing the Uwell Caliburn X to output 5-20W easily.
In addition, the refillable pods hold up to 3mL and utilize a juice viewing window to ensure a minimum fill level to prevent any dry hits or burning of the coil. | The SMOK NOVO is an incredibly pocket-friendly vape kit with press fit 1.2Ω, 2mL refillable cartridge, and 450mAh internal cell.
The NOVO features a button-less draw-activated firing system capable of 10 to 16W, and the replaceable pods have a built-in coil and ergonomic mouthpiece. |
Reviews
There are no reviews yet.