| Description |
- GENE.TT Chipset
- Dimensions - 124mm by 35mm by 31mm
- Integrated 3000mAh Battery
- Wattage Output Range: 5-80W
- Voltage Output Range: 3.2-4.2V
- Resistance Range: 0.1-3.0ohm
- Smart Mode
- RBA Mode
- Manual Mode
- Double Ignition Mode
- Zinc-Alloy Chassis Construction
- Single Firing Button
- Two Adjustment Buttons
- OLED Display Screen
- Dual Slotted Sliding Airflow Adjustment
- 4.5mL Argus Pod
- Bottom Fill System
- Voopoo PnP Coil Series
- 0.3ohm PnP-VM1 Coil
- 1.0ohm PnP-R1 Coil
- Press-Fit Coil Installation
- Magnetic Pod Connection
- 2mL Argus MTL Pod
- Bottom Fill System
- Voopoo PnP Coil Series
- Press Fit Coil Installation
- Magnetic Pod Connection
- Lanyard Attachment Point
- Atomizer Short Circuit Protection
- Low Resistance Protection
- Temperature Protection
- Overcharge Protection
- Output Over-Current Protection
- Overtime Protection
- Type-C USB Port
- Available in Vintage Grey & Silver
|
- Dimensions - 100mm x 31mm x 23mm
- Integrated 1500mAh Rechargeable Battery
- Wattage Output Range: 5-60W
- Voltage Output Range: 0.5-4.0V
- Resistance Range: 0.2-3.0ohm
- Zinc-Alloy Chassis Construction
- IP67 Rating - Water/Dust/Shock Proofing
- Intuitive Firing Button
- LED Indicator Light
- Side OLED Display Screen
- Two Adjustment Buttons
- Magnetic Pod Connection
- 6mL Nord X RPM & RPM 2 Pod Capacity
- Side Fill System - Silicone Stoppered
- SMOK RPM & RPM 2 Coil Series
- 0.16ohm RPM 2 Mesh Coil - rated for 25-50W
- 0.4ohm RPM Mesh Coil - rated for 25W
- Press-Fit Connection
- Atomizer Recognition
- Overheating Protection
- 8S Cut-Off Protection
- Short-Circuit Protection
- Low Battery Warning
- MicroUSB Port
|
- SMOK THINNER Kit Dimensions – 88mm by 43mm by 10mm
- Integrated 750mAh Rechargeable Battery
- Wattage Output Range: 1-25W
- Voltage Output Range: 0.7-4.0V
- Resistance Range: 0.6-3.0ohm
- Zinc-Alloy Chassis Construction of SMOK THINNER Kit
- Draw-Activated Firing Button
- 0.69″ OLED Display Screen
- Wattage Adjustment Button
- 4mL E-Liquid Capacity
- Bottom Fill System – Silicone Stoppered
- Integrated 0.8ohm Mesh Coil Pod
- Magnetic Pod Connection
|
- Proprietary Intelligent Chipset
- Dimensions - 95mm by 30.5mm by 20mm
- Integrated 1500mAh Rechargeable Battery
- Wattage Output Range: 1-40W
- Voltage Output Range: 0.5V-4.0V
- Resistance Range: 0.3-3.0ohm
- Zinc-Alloy Chassis Construction
- Single Button Operation - Firing & Wattage Adjustment
- 0.69"" OLED Display Screen
- 4.5mL NORD Pod - Supports NORD Coils
- 4.5mL RPM Pod - Supports RPM Coils
- Ergonomic Mouthpiece
- Side Fill System - Silicone Stoppered
- SMOK Nord & RPM Coil Series
- 0.4ohm RPM Mesh Coil
- 0.8ohm Nord DC MTL Coil
- Plug 'n' Play Coil Installation
- Magnetic Pod Connection
- Pod Detection
- Short-Circuit Protection
- 8 Seconds Cut-Off
- Low Voltage Protection
- MicroUSB Port
|
- Dimensions - 112mm by 23mm by 13mm
- Integrated 1000mAh Rechargeable Battery
- Wattage Output Range: 11-16W
- Aluminum Alloy Chassis Construction
- Intuitive Firing Button
- Draw-Activated Firing Mechanism
- Dual Firing Modes - Draw or Button Activated
- 4 LED Breathing Lights
- Adjustable Airflow Control Switch
- 2mL Pod Capacity
- Top Fill System - Mouthpiece Cover
- 0.8ohm MESH Pod
- 1.2ohm Regular Pod
- Magnetic Pod Connection
- Type-C USB Port
- Available in Black, Space Grey, Silver, Grape Purple, Orange Red, Lime Green
|
- Beautiful design with 10 eye-catching colour schemes and patterns
- Single control button
- New pod design for MTL or DTL vaping with 3.3 mL e-liquid capacity
- SInternal 1100mAh battery
- Comes with a meshed 0.6 ohm coil (for DTL) and a 0.9 ohm coil (for MTL)
- Compatible with SMOK Nord Replacement coil series
- Type-C USB Port
|
| Content | Shop the VOOPOO Argus Pro 80W Pod Mod Kit, featuring the GENE.TT Chipset, various output modes, and compatibility with the PnP Coil Series.
Hewn from durable zinc-alloy and accented with hints of leather, the Argus Pro delivers a great handfeel.
Ergonomically fitting within the hand, the Argus Pro can be brought around safely using the lanyard attachment point.
In addition, the Argus Pro can be used in a myriad of modes to safeguard the coil from burning or allow custom adjustment of the wattage power.
At the base is a type-C USB Port for fast charging and firmware updates, while at the top is a magnetic connection for PnP Pod and coils of the MTL or DTL variety | Utilizing 6mL refillable pods, the SMOK NORD X accepts coils in a bottom press fit connection, allowing quick and easy coil changes.
Constructed from durable zinc-alloy, the chassis of the NORD X is rated IP67, preventing the intrusion of dust or water, and is shock-proof, granting protection against light falls and drops. Displaying information on the side mounted OLED Display Screen, the NORD X relays critical vaping data back to the user in a legible easy to read manner. | Check out the SMOK THINER 25W Pod System Kit, 4mL e-liquid capacity, integrated 750mAh battery, and draw-activated firing system.
The SMOK THINER features a wattage output that can be adjusted and is shown on an OLED Display Screen.
It produces between 1 and 25W. The SMOK THINER uses a draw-activated firing mechanism that can be adjusted with a single button, thus there are no other buttons required, and built like a card.
The SMOK Thiner Pod System Kit is ideal for people who are constantly moving around because it can be conveniently stored in a pocket, handbag.
The SMOK 25W Pod System Kit is a compact, card-style kit that is perfect for vaping when on the go. It includes a 750mAh internal battery that can power vaping for up to a whole day on a single charge. You can select the ideal power level to match your favourite vaping style.
A Thiner 2ml refillable pod with a built-in 0.8 Ohm coil is included with each kit. This kit produces a little amount of vapour and is designed for MTL (Mouth To Lung) vaping. | Introducing the SMOK NORD 2 Pod Kit, integrating a 0.69" OLED Screen with 1500mAh battery, 40W Max Wattage Control, and utilizing both RPM and Nord Coil Technology.
Upgrading many of the previous features, the Nord 2 Pod System can hold up to 4.5mL of eJuice within the refillable pod.
Sold with two pods, the Nord 2 can support coils from both the Nord and RPM Coil Lines, accepted into the respective pod in a plug 'n' play manner for quick and easy installs or coil changes.
In addition, the NORD 2 Kit maintains the same single button layout, adding a 0.69" OLED display screen to relay the wattage output and battery life, adjusting the wattage with the single firing button. With improved readability and upgrades to the useful original features, makes the SMOK NORD 2 Kit a fine successor to the classic Nord Pod System we all fell in love with. | Discover the Vaporesso XROS 2 16W Pod System, featuring a 1000mAh battery, dual firing systems, and compatibility with both the Mesh and Regular XROS Pods.
Adopting an aluminium alloy chassis, the body is slim and lightweight, making the XROS 2 Pod System perfect for those travelling or on-the-go.
Delivering superior vaping from the 11W or 16W output, depending on the type of pod used, the XROS 2 can last throughout the entire day and can work off a draw-to-fire or button activated firing system. |
The Nord Pro mouthpiece features a duck-billed design and a subtle lip curve to fit your mouth and offer a better user experience.
The Smok Nord Pro pods are a simple side-fill design that slots into the top of your device. The clear glass feature allows you to stay up to date with your e-liquid levels, so you know exactly when to refill with your favourite e-juice flavour. These pods hold 2ml of your favourite e-liquid flavour.
The Nord Pro provides multiple protective features to avoid potential risks.
- Lithium battery protection
- 8 seconds cut-off
- Short circuit protection
- Low voltage protection
|
Reviews
There are no reviews yet.